If your Philips TV is having sound issues, there are a few things you can do to rectify the situation.
First, try looking for Software Updates available for your TV. These updates may contain new software that can help to fix the sound issue.
If that doesn’t work, you can try resetting your TV’s settings. This will restore all of the settings to their factory defaults, and may resolve the sound issue.
However, if none of these methods work there are others that you can try to troubleshoot any sound issues on a Philips TV.
Read on to learn how to fix sound issues on a Philips TV. Some of the methods that work are:
- Power Cycle the Philips TV
- Change the Input and Output Mode
- Disconnect any Bluetooth Headphones or Earbuds
- Update the Firmware
- Reset the Philips TV
- Visit an Authorized Service Center
Table of Contents
How to Fix Sound Issues on a Philips TV
What causes sound issues on a Philips TV?
There are many reasons why your Philips TV might be facing sound issues.
Sometimes it’s due to buggy software or because the TV is connected to a pair of Bluetooth headphones or it could simply be a worn out IC chip on the motherboard that has caused the issue.
The following troubleshooting tips will help you rectify any sound issues on your Philips TV.
However, if the issue still hasn’t been fixed after troubleshooting the TV, then it’s time to visit the nearest service center and have them take a look at the TV.
Fix #1 — Power Cycle the Philips TV
One of the oldest tricks in the book is to power cycle the TV if there’s any issue with the sound or display.
Power cycling is basically the process of turning off and turning on the TV with a couple of minutes gap in between.
What we’re going to do here is with a small twist. We’re going to remove the power cable from the wall while we wait for a few minutes before powering on the TV again.

This is done to clear any remaining charge on the IC chip and capacitors.
So once the TV is plugged back in and turned on the fix should resolve any transient problems or electrical related problems that are causing the sound issue. You can follow these steps to get this done.
- Turn off the Philips TV
- Unplug the power cable from the wall port
- Wait for 5-10 minutes
- Connect the TV to the power source
- Switch on the Philips TV
Fix #2 — Change the Input and Output Mode
Another likely cause would be mode selected. Normally choosing the wrong input/output mode will not only result in sound issues but even display issues.
A quick fix for this case would be to change the input and output settings to the right configuration.
One of the most common scenarios is when you have a speaker system connected to the TV.

Unless you select the right output mode, you will not be able to hear anything play through the speakers and vice versa, if the speaker system is turned off and the output device is selected as external speakers then you will not be able to hear anything from the TV until the speaker system is turned on.
To change your TVs output settings,
- Switch on the Philips TV
- Press the Menu button on the TV remote and then click on Sound
- Locate and tap on Advanced
- Now select Speaker Setup and then choose whether you’re connected to an external system or you’re going to use the internal speakers.
- Restart the TV for the changes to take effect
Fix #3 — Disconnect any Bluetooth Headphones or Earbuds
If you regularly use your Bluetooth headphones or earbuds with your TV then one likely cause of there being no sound from the TV speakers is because your headphones or earbuds are still connected to the Philips TV via Bluetooth.
Disconnecting the headphones will fix the problem and you will be able to hear audio from your TVs built-in speakers.

- Tap on the Menu button on the Philips remote
- Navigate to Remote and Accessories
- Open Bluetooth
- Disconnect the connected headphones / Turn off Bluetooth
- Restart the TV
However, if you do not use Bluetooth headphones, but you’re still facing sound issues, check the 3.5mm audio port on the TV and make sure that nothing is connected and the port is clean.
At times, the TV will recognize debris in the port as an actual audio jack and will not know where to route the audio.
Fix #4 — Update the Firmware
Here’s an easy one, sound, display and networking issues can easily be fixed if the problem is caused by a bug in the software.
Generally, Philips releases bug fixes in their updates and making sure your Philips TVs software is up to date is key to preventing any sound or display issues from cropping up.
To update the firmware of your Philips TV,
- Press the Home button on the Philips TV remote and then click on Settings
- Scroll down and then tap on Support

- Select the first option labeled Software Update
- Search for an available update and then click on the download and install button to update the firmware
- The TV will restart and it will now run the latest firmware with the necessary patches and bug fixes installed.
Fix #5 — Reset the Philips TV
Another quick fix that can resolve most of the issues on a Philips TV is to reset the TV to its factory settings or stock configuration.
Resetting a Philips TV will help fix any software related issues and provide the TV with a fresh start.
To hard reset your Philips TV to fix sound issues:

- Press the Home button on the Philips TV remote and then click on Settings
- Scroll down and then tap on Support
- Click on Reset
- Once you enter the Philips TV Reset screen, click on Yes or Enter on the Remote to confirm the selection
If you have created a PIN for your TV and do not remember what it is, you will not be able to reset the Philips TV and you will have to get in touch with the Philips support team via the chat method and get a resolution.
Visit an Authorized Service Center
Finally, if the sound issue on your Philips TV is not caused by any software problem or bug, it’s most likely a hardware issue and unless you’re a certified technician, it’s best to take the TV to Philips’s authorized service center and have the specialist take care of it.
Most of the time, with age, capacitors, IC chips and even sound cards can fail. This will result in either bad sounding audio or no audio at all. The only fix here is to replace the component and hopefully that will rectify the problem.
Takeaway
There you have it, 5 easy to follow steps to resolve any sound issues you may encounter on your LG TV.
I’ve personally tried these methods out and they do work, however if it’s a hardware issue then it’s best to take the TV to an authorized service center and get it fixed.
Also Read:
- How to Fix Sound Issues on a Samsung TV 2023 | 6 Quick Fixes That Actually Work!
- 6 Ways How to Fix Sound Issues on a Sony TV in 2023
Greetings! My name is Michael and this is my website.
I've been specializing in audio equipment and accessories for a while and have a little something in store for every kind of hi-fi enthusiast.
Based in California, I keep attending special launch events across the globe. This has helped me understand the products better, and with a unique hands-on experience I'm able to provide you with easy to understand reviews about the best in audio tech from around the world.