If you’re here to learn How to Fix Sound Issues on a Samsung TV, then you’re in luck because there are a few things you can do to rectify any problem.
First, try looking for Software Updates available for your TV. These updates may contain new software that can help to fix the sound issue.
If that doesn’t work, you can try resetting your TV’s settings. This will restore all of the settings to their factory defaults, and may resolve the sound issue.
However, if none of these methods work there are others that you can try to troubleshoot any sound issues on a Samsung TV.
Some of the methods that work are:
- Power Cycle the Samsung TV
- Run the Built-in Diagnostics Test
- Change the Input and Output Mode
- Disconnect any Bluetooth Headphones or Earbuds
- Update the Firmware
- Reset the Samsung TV
- Visit an Authorized Service Center
Table of Contents
How to Fix Sound Issues on a Samsung TV
What causes sound issues on a Samsung TV?
There are many reasons why your Samsung TV might be facing sound issues.
Sometimes it’s due to buggy software or because the TV is connected to a pair of Bluetooth headphones or it could simply be a worn out IC chip on the motherboard that has caused the issue.
The following troubleshooting tips will help you rectify any sound issues on your Samsung TV.
However, if the issue still hasn’t been fixed after troubleshooting the TV, then it’s time to visit the nearest service center and have them take a look at the TV.
6 Quick Fixes for Sound Issues on a Samsung TV
Fix #1 — Power Cycle the Samsung TV
One of the oldest tricks in the book is to power cycle the TV if there’s any issue with the sound or display.
Power cycling is basically the process of turning off and turning on the TV with a couple of minutes gap in between.
What we’re going to do here is with a small twist. We’re going to remove the power cable from the wall while we wait for a few minutes before powering on the TV again.
This is done to clear any remaining charge on the IC chip and capacitors.
So once the TV is plugged back in and turned on the fix should resolve any transient problems or electrical related problems that are causing the sound issue.
You can follow these steps to get this done.
- Turn off the Samsung TV
- Unplug the power cable from the wall port
- Wait for 5-10 minutes
Fix #2 — Run the Built-in Diagnostics Test
Running a diagnostics test is probably one of the most effective ways to determine what’s causing the sound issue on any TV.
Luckily, Samsung TVs come with a built-in audio diagnosis tool that you can use to determine what the problem is, whether it’s software related or hardware related.
To use the built-in audio diagnosis tool on a Samsung TV,
- Switch on the Samsung TV
- Press the Menu button on the TV remote and then click on Support
- Now, locate the Self Diagnosis option and click on it
- Next, tap on Sound Test and wait for the TV to play a test audio clip
If you hear the audio clip play from the TV then the sound issue is most likely temporary and/or caused by a software glitch or an out-of-date application.
Generally updating the software should fix this issue.
However, if you do not hear any sound from the sound test clip the issue could be a bit more serious such as a faulty sound IC or corroded wiring terminals on the motherboard which would mean that only a certified TV technician can fix the issue for you.
You can also visit the manufacturers service center and get the issue fixed for free if the TV is still within the warranty period.
Fix #3 — Change the Input and Output Mode
Another likely cause would be mode selected. Normally choosing the wrong input/output mode will not only result in sound issues but even display issues.
A quick fix for this case would be to change the input and output settings to the right configuration.
One of the most common scenarios is when you have a speaker system connected to the TV.
Unless you select the correct output mode, you will not be able to hear anything play through the speakers and vice versa, if the speaker system is turned off and the output device is selected as external speakers then you will not be able to hear anything from the TV until the speaker system is turned on.
To change your TVs output settings,
- Switch on the Samsung TV
- Press the Menu button on the TV remote and then click on Sound
- Locate and tap on Audio
- Now select Speaker Setup and then choose whether you’re connected to an external system or you’re going to use the internal speaker
- Restart the TV for the changes to take effect
Fix #4 — Disconnect any Bluetooth Headphones or Earbuds
If you regularly use your Bluetooth headphones or earbuds with your TV then one likely cause of there being no sound from the TV speakers is because your headphones or earbuds are still connected to the Samsung TV via Bluetooth.
Disconnecting the headphones will fix the problem and you will be able to hear audio from your TVs built-in speakers.
Tap on the Menu button on the Samsung remote
- Navigate to Network and Connections
- Open Bluetooth
- Disconnect the connected headphones / Turn off Bluetooth
- Restart the TV
However, if you do not use Bluetooth headphones, but you’re still facing sound issues, check the 3.5mm audio port on the TV and make sure that nothing is connected and the port is clean.
At times, the TV will recognize debris in the port as an actual audio jack and will not know where to route the audio.
Fix #5 — Update the Firmware
Here’s an easy one, sound, display and networking issues can easily be fixed if the problem is caused by a bug in the software.
Generally, Samsung releases bug fixes in their updates and making sure your Samsung TVs software is up to date is key to preventing any sound or display issues from cropping up.
To update the firmware of your Samsung TV,
- Press the Home button on the Samsung TV remote and then click on Settings
- Scroll down and then tap on Support
- Select the first option labeled Software Update
- Search for an available update and then click on the download and install button to update the firmware
- The TV will restart and it will now run the latest firmware with the necessary patches and bug fixes installed.
Fix #6 — Reset the Samsung TV
Another quick fix that can resolve most of the issues on a Samsung TV is to reset the TV to its factory settings or stock configuration.
Resetting a Samsung TV will help fix any software related issues and provide the TV with a fresh start.
To hard reset your Samsung TV to fix sound issues:
- Press the Home button on the Samsung TV remote and then click on Settings
- Scroll down and then tap on Support
- Locate Self Diagnosis from the list of options and then click on Reset
- Once you enter the Samsung TV Reset screen, enter the PIN you created for the TV
- If you have not created an PIN then enter ‘0000’
- Click on Yes or Enter on the Remote to confirm the selection
If you have created a PIN for your TV and do not remember what it is, you will not be able to reset the Samsung TV and you will have to get in touch with the Samsung support team via the chat method and get a resolution.
Visit an Authorized Service Center
Finally, if the sound issue on your Samsung TV is not caused by any software problem or bug, it’s most likely a hardware issue and unless you’re a certified technician, it’s best to take the TV to Samsung’s authorized service center and have the specialist take care of it.
Most of the time, with age, capacitors, IC chips and even sound cards can fail. This will result in either bad sounding audio or no audio at all.
The only fix here is to replace the component and hopefully that will rectify the problem.
Takeaway
I hope these 6 methods helped you resolve any sound issues you might have been facing on your Samsung TV.
If there are any doubts or questions, feel free to drop a message below.
Until the next time!
Ciao
Also Read:
- How to Connect Surround Sound Speakers to a TV
- How To Set Up Surround Sound on a PC | Boost your Listening Experience in a Few Steps
Greetings! My name is Michael and this is my website.
I've been specializing in audio equipment and accessories for a while and have a little something in store for every kind of hi-fi enthusiast.
Based in California, I keep attending special launch events across the globe. This has helped me understand the products better, and with a unique hands-on experience I'm able to provide you with easy to understand reviews about the best in audio tech from around the world.
